Changing a Refrigerator Liquid Provide Valve. So how exactly does a water supply valve work?

Changing a Refrigerator Liquid Provide Valve. So how exactly does a water supply valve work?

A water supply valve is required to control the water coming into the appliance if your refrigerator has a water and ice dispenser feature, or even just an installed ice maker. The supply valve is normally situated at the rear that is bottom of ice box behind an access panel. The home??™s water supply generally travels through copper tubing connected to the valve inlet slot.

The supply valve can be an electrically-control component with inlet and socket water ports plus one or maybe more solenoids.

whenever signaled by way of a control board, the solenoid or solenoids will available to enable water to enter an inlet hose which directs water with an optional water filter into the dispenser and/or to an ice maker tray fill tube. In the long run, the solenoids can fail or calcium deposits can establish within the valve producing an obstruction, causing the ice manufacturer not able to create ice and restricted, or no, water taken from the dispenser if the lever is pushed. Since water supply valves may not be effortlessly washed or fixed, a malfunctioning valve should be changed with a brand new one.

Simple tips to change a water supply valve that is defective

  • Unplug the power cord that is refrigerator??™s.
  • Shut the water supply off to your fridge.
  • Pull the fridge out of the wall.
  • Unthread the screws to eliminate the low access panel that is rear. Bear in mind, you may want to detach the copper tubing or incoming water line from the inlet valve slot before you completely take away the panel.
  • Detach the incoming water line from the water supply valve inlet slot for those who haven??™t done this currently.
  • Unthread the screws release a water supply valve mounting plate or bracket from the ice box framework.
  • Disconnect the cable connecter or connecters through the solenoid terminals.
  • If applicable, slide out any locking videos then depress the keeping rings to detach the socket hose or hoses through the valve ports. Be equipped for some water to spill.
  • If required, take away the old water supply valve through the mounting plate or bracket.
  • Install the brand new water supply valve by aligning it in the mounting dish or bracket if required.
  • Completely place the hose or hoses to the socket ports and, if needed, fall in the locking clip or videos to secure.
  • Link the wire connecter or connecter into the terminals that are solenoid.
  • Position the mounting dish or bracket regarding the ice box frame and thread the screws to secure.
  • Realign the access panel and secure it because of the screws.
  • Connect the incoming water line buy a bride online to your valve??™s inlet slot. Then use a wrench to tighten if the water is being supplied through copper tubing, hand-thread the tubing??™s compression nut onto the inlet port. Avoid overtightening or perhaps you may damage the tubing.
  • Go the fridge straight right back contrary to the wall surface.
  • Turn water supply right right back on.
  • Plug the power that is refrigerator??™s back.
  • Start the ice manufacturer or run water through the dispenser to ensure the brand new supply valve is working precisely and there are not any leakages.

Discover the water that is right valve with Repair Clinic

Since water supply valves vary with respect to the fridge model, it is essential to recognize the precise valve that fits your fridge. To achieve this, enter the complete model wide range of the applying within the fix Clinic search club, then select ???Valve & Float??? through the component category filter regarding the left part associated with page to get the matching part. Fix Clinic stocks water supply valves for all the top brand name fridges, including Frigidaire, Whirlpool, Kenmore, Samsung, and LG, but you??™ll want to be sure you??™re purchasing the specific valve that matches your model.

test5574